Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 399

fwConfigure 2 TABLE 19 Class Access Gateway mode Area Fabric FFL_Port (Optical FFL_Port (Copper) Resource class EE Performance Monitor Filter Performance Monitor Resource E_Port downs Fabric reconfigure Domain ID changes Segmentation changes Zone changes FabricQL Fabric logins SFP state changes Same as Port class Same as Port class Flash area Invalid CRCS RX Performance TX Performance Customer Defined Flash Notes This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Not all platforms support fans or power supplies. If you attempt to configure values for these items the following displays: "ERROR: No threshold available. Operands This command has the following optional operands: --enable --port port Enables all thresholds associated with a certain port. --disable --port port Disables all thresholds associated with a certain port. Examples To configure thresholds in Fabric OS mode: switch:admin> fwconfigure 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class 7 : Alpa performance Monitor class 8 : EE performance Monitor class 9 : Filter performance Monitor class 10 : Security class 11 : Resource class 12 : Quit Select a class => : (1..12) [1] 1 1 : Temperature 2 : Fan Fabric OS Command Reference 367 53-1001764-02