Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 791
portShow, To display additional performance parameters on tunnel 17 add, to display all circuits
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 791 highlights
portShow 2 Circuit ID: 17.3 Circuit Num: 3 Admin Status: Enabled Oper Status: Up Remote IP: 100.83.0.103 Local IP: 100.80.0.103 Metric: 0 Min Comm Rt: 1000000 Max Comm Rt: 1000000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 10000 Path MTU Disc: 0 VLAN ID: (Not Configured) L2CoS: (VLAN not Configured) DSCP: F: 0 H: 0 M: 0 L: 0 Flags: 0x00000000 To display additional performance parameters on tunnel 17 (add -c to display all circuits): switch:admin> portshow fciptunnel 17 --perf Tunnel ID: 17 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: On (Moderate) Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:55:59:e9 Peer WWN: 10:00:00:05:1e:55:68:05 Circuit Count: 4 Flags: 0x00000000 FICON: Off Oper Status: Up Flow Ctrl State: On Connected Count: 2 Tunnel Duration: 6 hours, 52 minutes, 18 seconds Compression Statistics: 10588 Uncompressed Bytes 7400 Compressed Bytes 1.43 : 1 Compression Ratio Performance Statistics: Overall Throughput 285016 Output Bytes 14 Bps 30s Avg, 11 Bps Lifetime Avg 2642 Output Packets 0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg 534396 Input Bytes 14 Bps 30s Avg, 21 Bps Lifetime Avg 2754 Input Packets 0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg TCP Stats: 34379252 Output Bytes 501434 Output Packets 14791556 Input Bytes 490602 Input Packets Fabric OS Command Reference 759 53-1001764-02