Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 550

2 myId myId Displays the current login session details. Synopsis myid Description Use this command to display the status of the system and the login session details. This includes IPv4 or IPv6 addresses associated with the login session. The login session gives details of the following: • CP/switch (or console/serial port) used to log in. • The IP address of the current login session for Telnet or the name of the current console port or the serial port (if modem login used). • The current CP mode (Active, Standby, or Unknown). • The current system status (Redundant, Nonredundant, or Unknown). Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands none Examples To display current login information: switch:admin> myid Current Switch: switch Session Detail: switch (123.123.123.123) Active Redundant See Also version 518 Fabric OS Command Reference 53-1001764-02