Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 739

portFencing 2 fop-port Enables or disables port fencing for all optical F_Ports. fcu-port Enables or disables port fencing for all copper F_Ports. This operand is supported only on embedded platforms and only on copper ports. port Enables or disables port fencing for all physical ports. -area area | -area all Specifies one or more Fabric Watch areas to be monitored by the port fencing feature. Areas are not case sensitive. Alternately, use the all option to specify all of the following areas: CRC Cyclic redundancy check error ITW Invalid word transmission PE Protocol error ST State Change LR Link reset C3TX_TO Class 3 frame discard due to timeout. --help Displays the command usage. Examples To enable port fencing for the CRC area on all E_Ports: switch:admin> portFencing --enable e-port -area crc To enable port fencing for all areas on all E_Ports: switch:admin> portFencing --enable e-port -area all To enable port fencing for all areas on all E_Ports: switch:admin> portFencing --enable e-port -area all To enable port fencing for the CRC, ITW, and PE areas on all E_Ports: switch:admin> portFencing --enable e-port -area CRC,ITW,PE To enable port fencing for the ST area on all E_Ports and optical F_Ports: switch:admin> portFencing --enable e-port,fopport -area ST To enable port fencing for the ST area on all port types: switch:admin> portFencing --enable all -area ST To display the current port fencing configuration: switch:admin> portFencing --show Port Type|Area |PF Status E-port |CRC |disabled |ITW |enabled |LR |enabled |PE |enabled |ST |enabled FOP-port |CRC |enabled |ITW |enabled |LR |enabled |C3TX_TO |enabled Fabric OS Command Reference 707 53-1001764-02