Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 962
Serial ID. Indicates that an SFP is installed. Use, Index, Address, Media, portCfgGeMediaType, sfpShow
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 962 highlights
2 switchShow Index Slot Port Address Media -cu id Speed 1/8G 1/4G 1/2G 1G N1 2G N2 4G N4 8G N8 10G N10 AN UN State No_Card No_Module Mod_Val Mod_Inv No_Light Port index is a number between 0 and the maximum number of supported ports on the platform. The port index identifies the port number relative to the switch. Slot number; 1-12 Port number; 0-15, 0-31, or 0-47. The 24-bit Address Identifier. Media types include: No module present. Applicable to all port types. Displays when the copper (default) GbE port ge0 or ge1 is active (refer to portCfgGeMediaType for more information). If the optical GbE port is active and an SFP is installed (copper or optical), "id" is displayed. If nothing is installed on the optical port, the Media field shows "--". The "cu" field also displays for interchassis links (ICLs). Serial ID. Indicates that an SFP is installed. Use sfpShow to get more information about the SFP, including the serial number. The speed of the port: 125 Mbps 250 Mbps 500 Mbps 1 Gbps fixed transfer speed 1 Gbps negotiated transfer speed 2 Gbps fixed transfer speed 2 Gbps negotiated transfer speed 4 Gbps fixed transfer speed 4 Gbps negotiated transfer speed 8 Gbps fixed transfer speed 8 Gbps negotiated transfer speed 10 Gbps fixed transfer speed 10 Gbps negotiated transfer speed Autonegotiating Unknown Port state information: No interface card present. No module (GBIC or other) present. Module validation in process. Module speed mismatch or incompatible SFP. The module is not receiving light. 930 Fabric OS Command Reference 53-1001764-02