Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 873

secPolicyAbort 2 secPolicyAbort Aborts all unsaved changes to the defined database. Synopsis secpolicyabort Description Use this command to abort all changes to the defined security database that have not been saved to flash memory and to abort changes to policy creation and modification operations from all the switches if a fabric-wide consistency policy is not set for the particular policy. Notes When an FCS policy is enabled, this command can be issued only from the Primary FCS switch. Only the user who made the changes to the defined database may use this command to abort them. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To abort all changes that have not been saved to nonvolatile memory: primaryfcs:admin> secpolicyabort Unsaved data has been aborted. primaryfcs:admin> secpolicyabort No new data to abort. See Also secPolicyActivate, secPolicyAdd, secPolicyDelete, secPolicyDump, secPolicyRemove, secPolicySave, secStatsShow Fabric OS Command Reference 841 53-1001764-02