Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 660
Vlan Id: 300, L2cos: F, Dscp: F: 32 H: 16 M
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 660 highlights
2 portCfg Peer WWN: 00:00:00:00:00:00:00:00 Circuit Count: 2 Flags: 0x00000000 FICON: Off Circuit ID: 16.0 Circuit Num: 0 Admin Status: Enabled Oper Status: In Progress Remote IP: 192.168.2.20 Local IP: 192.168.2.10 Metric: 0 Min Comm Rt: 100000 Max Comm Rt: 100000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 10000 Path MTU Disc: 0 VLAN ID: 300 L2CoS: F: 7 H: 5 M: 3 L: 1 DSCP: F: 32 H: 16 M: 8 L: 4 Flags: 0x00000000 Circuit ID: 16.1 Circuit Num: 1 Admin Status: Enabled Oper Status: In Progress Remote IP: 192.168.2.21 Local IP: 192.168.2.11 Metric: 0 Min Comm Rt: 100000 Max Comm Rt: 100000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 10000 Path MTU Disc: 0 VLAN ID: 200 L2CoS: F: 0 H: 0 M: 0 L: 0 DSCP: F: 0 H: 0 M: 0 L: 0 Flags: 0x00000000 switch:admin> Function Synopsis Commands supported only on the Brocade 7500/7500E and the Brocade FR4-18i platforms portcfg action [slot/] ge_port arguments Description Use this command to manage configuration parameters for ports and Gigabit Ethernet (GbE) ports on the Brocade 7500 and 7500E FC switches and on the FR4-18i FC blade. The following commands are exclusive to these platforms. • portcfg arp - Add and delete address resolution protocol (ARP) entries. Flush ARP table. • portcfg fciptunnel - Create, modify, and delete Fibre Channel over IP (FCIP) tunnels. - Delete, reset, and modify QoS mappings on an existing tunnel. - Create or modify a tunnel with VLAN tagging and Class of Service (CoS). - Create or modify a tunnel with Tape read/write Pipelining enabled or disabled. 628 Fabric OS Command Reference 53-1001764-02