Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 649
To create an IP interface using IPv4, To delete an IP interface
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 649 highlights
portCfg 2 dst_ipaddr Specifies an optional destination IP address (IPv4 or IPv6). All packets destined for this IP address are tagged accordingly. If a destination IP address is not specified, all packets not already tagged will be tagged. The default is 0.0.0.0. Examples To create an IP interface using IPv4: switch:admin> portcfg ipif ge0 create 192.168.0.20 255.0.0.0 1500 Operation Succeeded To create an IP interface using IPv6 with a prefix: switch:admin> portcfg ipif ge0 create 2000::22/64 1500 Operation Succeeded switch:admin> portshow ipif ge0 Port: ge0 Interface IPv4 Address NetMask Effective MTU Flags 0 192.168.0.20 255.255.255.0 1500 U R M 1 192.168.0.21 255.255.255.0 1500 U R M Interface IPv6 Address Len Effective MTU Flags 2 fe80::205:1eff:fec3:e6b2 64 1500 U R M 3 2000::20 64 1500 U R M 4 2000::21 64 1500 U R M 5 2000::22 64 1500 U R M Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp To delete an IP interface: switch:admin> portcfg ipif ge0 delete 192.168.0.20 Operation Succeeded To create a static IP route using an IPv4 destination address, a net mask, and a gateway address: switch:admin> portcfg iproute ge0 create 192.42.0.0 255.255.255.0 192.168.0.250 Operation Succeeded To create a static IP route using IPv6: switch:admin> portcfg iproute ge0 create 2000::/64 2000::1:250 Operation Succeeded switch:admin> portshow iproute ge0 Port: ge0 IP Address Mask Gateway Metric Flags 192.42.0.0 255.255.255.0 192.168.0.250 0 U G 192.168.0.0 255.255.255.0 * 0 U C 192.168.0.10 255.255.255.255 * 0 U H L 192.168.0.11 255.255.255.255 * 0 U H L 192.168.0.21 255.255.255.255 * 0 U C 192.168.0.250 255.255.255.255 * 0 U H L Fabric OS Command Reference 617 53-1001764-02