Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 713
portCfgShow, To display FCIP tunnels con d on a Brocade FR4-18i FC refer to the, help for an
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 713 highlights
portCfgShow 2 switch:admin> portcfgshow 16 Area Number: 11 Speed Level: AUTO(HW) Fill Word: 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port AE Port Auto Disable: OFF Rate Limit OFF EX Port ON Mirror Port OFF Credit Recovery ON F_Port Buffers OFF NPIV PP Limit: 126 CSCTL mode: OFF To display FCIP tunnels configured on a Brocade FR4-18i FC (refer to the portCfg help page for an explanation of the displayed parameters): switch:admin> portcfgshow 12/ge0 Mode: FCIP Persistent Disable: OFF Ipif configuration: Interface IP Address NetMask MTU 0 192.168.100.50 255.255.255.0 1500 1 192.168.100.51 255.255.255.0 1500 2 192.168.100.52 255.255.255.0 1500 3 192.168.100.53 255.255.255.0 1500 4 192.168.100.54 255.255.255.0 1500 5 192.168.100.55 255.255.255.0 1500 6 192.168.100.56 255.255.255.0 1500 7 192.168.100.57 255.255.255.0 1500 Inband management configuration: Inband management: Disabled CP Interface IP Address NetMask MTU GE Interface IP Address NetMask MTU Arp configuration: IP Address Mac Address Iproute Configuration: IP Address Mask Gateway Metric IPv6 Address Len Gateway Metric Fabric OS Command Reference 681 53-1001764-02