Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 794
portShow, To display IPSec parameters on an IPSec-enabled tunnel
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 794 highlights
2 portShow To display IPSec parameters on an IPSec-enabled tunnel: switch:admin> portshow fciptunnel 17 -i Tunnel ID: 17 Tunnel Description: Admin Status: Enabled Oper Status: Empty Compression: Off Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Enabled IPSec Key: '01234567890123456789012345678901' Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:c3:f0:16 Peer WWN: 00:00:00:00:00:00:00:00 Circuit Count: 0 Flags: 0x00000000 FICON: Off To display the FCIP tunnel hierarchy on the Brocade FX8-24: switch:admin> portshow fciptunnel 7/12--hier FCIP Tunnel 7/12 | High Level Tunnel Stats: | Operational Status: Up | Connected Count: 13 | Max Comm Rate: 1000000 | Compression Ratio: 1 : 1 | Compressed Bytes: 0 | Uncompressed Bytes: 0 | Bytes In: 890228 | Bytes In Avg: 17 | Bytes Out: 1084796 | Bytes Out Avg: 26 | Packets In: 7659 | Packets In Avg: 0 | Packets Out: 7659 | Packets Out Avg: 0 | Aggregate TCP Stats: | TCP Bytes In: 13183116 | TCP Bytes Out: 31193164 | TCP Packets In: 449744 | TCP Packets Out: 450000 | Retransmits: 236 | Longest RTT: 0 ms | Out Of Sequence: 0 | Slow Starts: 0 | Circuit Count: 1 | TCP Count: 4 | Circuits: |--> Circuit 7/12.0 | High Level Circuit Stats: | Operational Status: Up | Connected Count: 13 | Max Comm Rate: 1000000 | Bytes In: 890228 | Bytes In Avg: 17 | Bytes Out: 1084796 762 Fabric OS Command Reference 53-1001764-02