Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 982

2 sysMonitor sysMonitor Synopsis Configures Fabric Watch thresholds for the SFP, fabric, filter, security, and EE monitor classes and monitors memory and system resources.. sysmonitor --config class -area area [-highthreshold -value value] [-trigger above | below -action actions] [-lowthreshold -value value][-trigger above | below -action actions] [-buffer value] [-nosave] sysmonitor --apply class -area area [-action_level def | cust] [-thresh_level def | cust] sysmonitor --cancel class -area area [-action_level def | cust] [-thresh_level def | cust] sysmonitor --show [-class classs][-area area] [[-current_status]| [[-action_level def | cust] [-thresh_level def | cust]]] sysmonitor --config mem | cpu [-poll polling_interval] [-retry number_of_retries] [-limit high_usage_limit][-action action] [-high_limit high_limit] [-low_limit low_limit]] sysmonitor --show mem | cpu sysmonitor --help Description Use this command to configure thresholds for Fabric Watch event monitoring for temperature and system resources on the switch. The following operations are supported by this command: • Configure thresholds for Fabric Watch event monitoring and reporting for the environment and resource classes. Environment thresholds enable temperature monitoring, and resource thresholds enable monitoring of flash memory. This command follows a transaction model. Configuration changes are saved persistently to nonvolatile storage, but the changes do not take effect until you execute --apply. The --apply option allows you to toggle between default settings and your own saved custom configuration and to apply actions and thresholds separately. You may choose to use default thresholds together with a customized subset of available actions, or you may modify some of the thresholds and use the default actions. Use the -nosave option to save the configuration nonpersistently, and use --cancel to remove a nonpersistent configuration. • Configure memory or CPU usage parameters on the switch or display memory or CPU usage. Configuration options include setting usage thresholds which, if exceeded, trigger a set of specified Fabric Watch alerts. You can set up the system monitor to poll at certain intervals and specify the number of retries required before Fabric Watch takes action. Configuring thresholds for CPU and memory does not follow the transaction model of the typical Fabric Watch command. The --apply and --cancel option are not valid in this context. If any configured area exceeds the currently effective threshold settings, the Fabric Watch daemon can take one or more of the following actions: • Send an SNMP message. • Log a RAS log message. • Send an E-mail alert (valid only for the environment and resource class). • Log a port log message (valid only for the environment and resource class). 950 Fabric OS Command Reference 53-1001764-02