Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 455
To con an IPv4 FC address for the IPFC interface associated with a switch that is not in Virtual
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 455 highlights
ipAddrSet 2 switch:admin>ipaddrset -eth0 --add 10.12.34.123/24 To configure an IPv4 FC address for the IPFC interface associated with a logical switch with fabric ID 123: switch:admin>ipaddrset -ls 123 --add 11.1.2.4/24 IP address is being changed...Done. To verify the IPv4 FC address for the logical switch: switch:admin> ipaddrshow CHASSIS Ethernet IP Address: 10.32.220.10 Ethernet Subnetmask: 255.255.240.0 CP0 Ethernet IP Address: 10.32.220.11 Ethernet Subnetmask: 255.255.240.0 Host Name: cp0 Gateway IP Address: 10.32.208.1 CP1 Ethernet IP Address: 10.32.220.12 Ethernet Subnetmask: 255.255.240.0 Host Name: cp1 Gateway IP Address: 10.32.208.1 IPFC address for logical fabric ID 128: 1.2.3.4/24 Backplane IP address of CP0 : 10.0.0.5 Backplane IP address of CP1 : 10.0.0.6 To delete the IPv4 address for the IPFC interface associated with a logical switch with Virtual Fabric ID 67: switch:admin> ipaddrset -ls 67 --delete IP address is being changed...Done. To configure an IPv4 FC address for the IPFC interface associated with a switch that is not in Virtual Fabric mode: switch:admin>ipaddrset -ls 128 --add 10.32.72.70/24 IP address is being changed...Done. To verify the changes: switch:admin>ipaddrshow SWITCH Ethernet IP Address: 10.32.72.9 Ethernet Subnetmask: 255.255.240.0 Gateway IP Address: 10.32.64.1 DHCP: Off IPFC address for virtual fabric ID 128: 10.32.72.70/24 Interactive command usage examples To set the IPv4 address details for a switch chassis in interactive mode: switch:admin> ipaddrset -chassis Ethernet IP Address [192.168.166.148]: Fabric OS Command Reference 423 53-1001764-02