Dell PowerEdge T310 Hardware Owner's Manual - Page 139
See backplane upwards.
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
5 Disconnect all of the cables connected to the SAS backplane including the nSAS A cable, SAS B cable used for 3.5 inch hard drives, the backplane power cable, and the data cable. See Figure 3-28. 6 To remove the SAS backplane, pull the blue release pin and slide the backplane upwards. 7 Pull the backplane away from the front of the system until the securing slots are free from the tabs on the chassis. Figure 3-28. Removing and Installing a SAS Backplane 3 2 1 6 1 power cable 3 blue release pin 5 SAS backplane 4 5 2 SAS A cable 4 J_planar cable 6 hard drive Installing System Components 139
Installing System Components
139
5
Disconnect all of the cables connected to the SAS backplane including
the nSAS A cable, SAS B cable used for 3.5 inch hard drives, the backplane
power cable, and the data cable.
See Figure 3-28.
6
To remove the SAS backplane, pull the blue release pin and slide the
backplane upwards.
7
Pull the backplane away from the front of the system until the securing
slots are free from the tabs on the chassis.
Figure 3-28.
Removing and Installing a SAS Backplane
1
power cable
2
SAS A cable
3
blue release pin
4
J_planar cable
5
SAS backplane
6
hard drive
3
2
4
5
6
1