Dell PowerEdge T310 Hardware Owner's Manual - Page 92
Hard Drive From a Hard-Drive Carrier
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
4 Open the hard-drive carrier release handle to release the drive. See Figure 3-8. 5 Slide the hard drive out until it is free of the drive bay. 6 Remove the hard drive from the carrier. See "Removing a Hot-Swap Hard Drive From a Hard-Drive Carrier" on page 94. 7 Insert a drive blank in the vacated drive bay. See "Installing a Hard-Drive Blank" on page 91. 8 Replace the front bezel. See "Installing the Front Bezel" on page 82. CAUTION: To maintain proper system cooling, all empty hard-drive bays must have drive blanks installed. Figure 3-8. Removing or Installing a Hot-Swap Hard Drive 1 2 1 release button 3 hard-drive carrier 3 2 hard-drive carrier handle 92 Installing System Components
92
Installing System Components
4
Open the hard-drive carrier release handle to release the drive.
See Figure 3-8.
5
Slide the hard drive out until it is free of the drive bay.
6
Remove the hard drive from the carrier. See "Removing a Hot-Swap
Hard Drive From a Hard-Drive Carrier" on page 94.
7
Insert a drive blank in the vacated drive bay. See "Installing a Hard-Drive
Blank" on page 91.
8
Replace the front bezel. See "Installing the Front Bezel" on page 82.
CAUTION:
To maintain proper system cooling, all empty hard-drive bays must
have drive blanks installed.
Figure 3-8.
Removing or Installing a Hot-Swap Hard Drive
1
release button
2
hard-drive carrier handle
3
hard-drive carrier
1
2
3