Dell PowerEdge T310 Hardware Owner's Manual - Page 87
Expansion Card Stabilizer, Removing the Expansion Card Stabilizer
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
7 Place the system upright on a flat surface. 8 Reattach any peripherals and connect the system to an electrical outlet. 9 Turn on the system and attached peripherals. Expansion Card Stabilizer Removing the Expansion Card Stabilizer 1 Turn off the system and attached peripherals. Disconnect the system from the electrical outlet and peripherals. 2 Open the system. See "Opening the System" on page 85. 3 While pressing inwards on the touch points of the expansion card stabilizer, lift it away from the system. See Figure 3-6. Installing the Expansion Card Stabilizer 1 Align the expansion card stabilizer with the slots on the chassis and the cooling shroud. 2 Hold the touch points and lower the expansion card stabilizer. See Figure 3-6. 3 Close the system. See "Closing the System" on page 86. 4 Place the system upright on a flat surface. 5 Reattach any peripherals and connect the system to an electrical outlet. 6 Turn on the system and attached peripherals. Installing System Components 87