Dell PowerEdge T310 Hardware Owner's Manual - Page 62
Processor Settings Screen, SATA Settings Screen, Option, Description - virtual
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Processor Settings Screen Option Description 64-bit Specifies if the processor supports 64-bit extensions. Core Speed Displays the processor clock speed. Bus Speed Displays the processor bus speed. Logical Processor (Enabled default) On processors that support Simultaneous Multi-Threading (SMT) technology, each processor core supports up to two logical processors. If this field is set to Enabled, the BIOS reports both logical processors. If set to Disabled, only one logical processor is monitored by the BIOS. Virtualization Technology NOTE: Disable this feature if your system will not be (Enabled default) running virtualization software. Enabled permits virtualization software to use the virtualization technology incorporated in the processor. Execute Disable (Enabled default) Enables or disables execute disable memory protection technology. Number of Cores per Processor (All default) If set to All, the maximum number of cores in the processor is enabled. C States (Enabled default) When set to Enabled, the processor(s) can operate in all available power states. Turbo Mode (Enabled default) If Turbo Boost Technology is supported by the processor, enables or disables Turbo Mode. Processor 1 Family -Model- Displays the family, model, and stepping of the processor Stepping SATA Settings Screen Option SATA Controller Port A (Off default) Description ATA Mode enables the integrated SATA controller. Off disables the controller. Auto enables BIOS support for the device attached to SATA port A. Off disables BIOS support for the device. 62 Using the System Setup Program and UEFI Boot Manager