Dell PowerEdge T310 Hardware Owner's Manual - Page 82
Installing the Front Bezel, Front Bezel Inserts, Removing the Front Bezel Insert
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Installing the Front Bezel 1 Insert the bezel tabs into the bezel tab slots in the chassis. See Figure 3-2. 2 Press the top end of the bezel into the chassis until the lever locks into place. 3 Using the system key, lock the bezel. Front Bezel Inserts Removing the Front Bezel Insert NOTE: Before installing a drive in one or more of the front drive bays, remove the corresponding insert(s) on the front bezel. NOTE: Bezel inserts may contain screws on the inside. You can attach the screws to new drives, as needed. 1 Remove the front bezel. See "Removing the Front Bezel" on page 81. 2 Press the insert tab and pull the insert away from the bezel. See Figure 3-3. Figure 3-3. Removing and Installing the Front Bezel Insert 1 2 1 front bezel 3 insert tab 3 2 front bezel insert 82 Installing System Components