Dell PowerEdge T310 Hardware Owner's Manual - Page 25
LCD Status Messages - hard drive
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Table 1-1. Diagnostic Indicator Codes (continued) Code Causes No memory modules detected. Corrective Action See "Troubleshooting System Memory" on page 155. System board failure. See "Getting Help" on page 177. Memory configuration See "Troubleshooting System error. Memory" on page 155. Possible system board resource and/or system board hardware failure. See "Getting Help" on page 177. Possible system resource See "Getting Help" on page 177. configuration error. Other failure. Ensure that the diskette drive, optical drive, and hard drives are properly connected. See "Troubleshooting Your System" on page 147 for the appropriate drive installed in your system. If the problem persists, see "Getting Help" on page 177. LCD Status Messages The LCD messages consist of brief text messages that refer to events recorded in the System Event Log (SEL). For information on the SEL and configuring system management settings, see the systems management software documentation. NOTE: If your system fails to boot, press the System ID button for at least five seconds until an error code appears on the LCD. Record the code, then see "Getting Help" on page 177. About Your System 25