Dell PowerEdge T310 Hardware Owner's Manual - Page 86
Closing the System, See - parts
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Figure 3-5. Opening and Closing the System 1 2 3 4 1 cover release latch lock 3 system cover 2 cover release latch 4 chassis slots Closing the System 1 Ensure that all internal cables are connected and folded out of the way. 2 Ensure that no tools or extra parts are left inside the system. 3 Place the bottom edge of the cover, opposite from the cover release latch, into the slots in the system chassis. See Figure 3-5. 4 Lower the cover into the chassis. 5 Press the latch end of the cover into the chassis until the latch locks into place. 6 Turn the lock on the cover release latch clockwise to the locked position. See Figure 3-5. 86 Installing System Components
86
Installing System Components
Figure 3-5.
Opening and Closing the System
Closing the System
1
Ensure that all internal cables are connected and folded out of the way.
2
Ensure that no tools or extra parts are left inside the system.
3
Place the bottom edge of the cover, opposite from the cover release latch,
into the slots in the system chassis. See Figure 3-5.
4
Lower the cover into the chassis.
5
Press the latch end of the cover into the chassis until the latch
locks into place.
6
Turn the lock on the cover release latch clockwise to the locked position.
See Figure 3-5.
1
cover release latch lock
2
cover release latch
3
system cover
4
chassis slots
1
2
4
3