Dell PowerEdge T310 Hardware Owner's Manual - Page 24
Table 1-1., Diagnostic Indicator Codes, Causes, Corrective Action, See Getting Help - video card
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Table 1-1. Diagnostic Indicator Codes Code Causes Corrective Action The system is in a normal Plug the system into a working off condition or a possible electrical outlet and press the pre-BIOS failure has power button. occurred. The diagnostic lights are not lit after the system successfully boots to the operating system. The system is in a normal Information only. operating condition after POST. BIOS checksum failure detected; system is in recovery mode. See "Getting Help" on page 177. Possible processor failure. See "Troubleshooting the Processor" on page 163. Memory failure. See "Troubleshooting System Memory" on page 155. Possible expansion card See "Troubleshooting Expansion failure. Cards" on page 162. Possible video failure. See "Getting Help" on page 177. Hard drive failure. Possible USB failure. Ensure that the diskette drive and hard drive are properly connected. See "Hard Drives" on page 90 for information on the drives installed in your system. See "Troubleshooting a USB Device" on page 148. 24 About Your System