Dell PowerEdge T310 Hardware Owner's Manual - Page 44
Warning: Memory, See General Memory - maximum memory
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Table 1-3. System Messages (continued) Message Causes Corrective Actions Maximum rank count exceeded. The following DIMM has been disabled: x Invalid memory configuration. The system will run but with the specified memory module disabled. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 108. Memory address line failure at address, read value expecting value Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 155. Memory double word logic failure at address, read value expecting value Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 155. Memory Initialization Warning: Memory size may be reduced Invalid memory Ensure that the memory configuration. The system modules are installed in a will run but with less memory valid configuration. than is physically available. See "General Memory Module Installation Guidelines" on page 108. Memory odd/even logic failure at address, read value expecting value Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 155. Memory write/read failure at address, read value expecting value Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 155. 44 About Your System