Dell Precision Rack 7910 Dell Precision Rack 7910 Owners Manual - Page 137
Cold Reboot Power cycle Reboot Test Point Memory Init Complete by default., When enabled
View all Dell Precision Rack 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
The Miscellaneous Settings screen details are explained as follows: Menu Item System Time System Date Asset Tag Keyboard NumLock Description Enables you to set the time on the system. Enables you to set the date on the system. Displays the asset tag and enables you to modify it for security and tracking purposes. Enables you to set whether the system boots with the NumLock enabled or disabled. By default the Keyboard NumLock is set to On. NOTE: This option does not apply to 84-key keyboards. F1/F2 Prompt on Error Load Legacy Video Option ROM In-System Characterization Enables or disables the F1/F2 prompt on error. By default, F1/F2 Prompt on Error is set to Enabled. The F1/F2 prompt also includes keyboard errors. Enables you to determine wether the system BIOS loads the legacy video (INT 10H) option ROM from the video controller. Selecting Enabled in the operating system does not support UEFI video output standards. This field is only for UEFI boot mode. You cannot set this to Enabled if UEFI Secure Boot mode is enabled. This option enables or disables In-System Characterization. By default, In-System Characterization is set to Enabled - No Reboot. The two other options are Enabled and Disabled. When enabled, In-System Characterization (ISC) executes during POST upon detecting relevant change(s) in system configuration to optimize system power and performance. ISC takes about 20 seconds to execute, and system reset is required for ISC results to be applied. The Enabled - No Reboot option executes ISC and continues without applying ISC results until the next time system reset occurs. The Enabled option executes ISC and forces an immediate system reset so that ISC results can be applied. It takes the system longer to be ready due to the forced system reset. When disabled, ISC does not execute. Dell Wyse P25BIOS Access Debug Menu This option is enabled by default. Debug Error Lever - Reboot Text Mode - off (default) Cold Reboot Power cycle Reboot Test Point Memory Init Complete by default. PCI Init Complete Embedded SATA test mode - Disabled (Default) Spread Spectrum - Disabled Embedded SATA RSTe Debug - Disabled MRC Serial Debug Output - Disabled DFx Margining - Dsiabled TXEQ PCIe Workaround - Enabled (default) Miscellaneous .Device Unhide - Disabled 137