Dell Precision Rack 7910 Dell Precision Rack 7910 Owners Manual - Page 89
Control panel assembly, Removing the control panel
View all Dell Precision Rack 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
CAUTION: To prevent damage to the control panel flex cable, do not to bend the control panel flex cable after it is inserted into the connector. 1. Use the hooks on the chassis as guides to align the hard-drive backplane. 2. Slide down the hard-drive backplane until the release tabs snap into place. 3. Connect the HHD/SSD data, signal, and power cable to the backplane. 1. Replace the cooling-fan assembly. 2. Replace the cooling shroud. 3. Install the hard drives in their original locations. 4. Follow the procedure listed in After working inside your system . Control panel assembly Removing the control panel 1. Ensure that you read the Safety instructions. 2. Follow the procedure listed in Before working inside your system. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Slide the control panel from the chassis. CAUTION: Do not use excessive force when removing the control panel as it can damage the connectors. 2. From inside the system, push the control panel out of the chassis. 3. Remove all the cables connecting the control panel to the chassis. 1. control panel 89