Dell Precision Rack 7910 Dell Precision Rack 7910 Owners Manual - Page 42
Removing the cooling-fan assembly
View all Dell Precision Rack 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. NOTE: Your system supports six hot-swappable cooling fans. 1. Align the plug at the base of the cooling fan with the connector on the system board. 2. Slide the cooling fan into the securing slots until the tabs lock into place. Follow the procedure listed in After working inside your system. To see a video on how to remove & install a fan or the fan assembly, scan this QR code, or click here: http://www.Dell.com/QRL/Workstation/R7910/Fans Removing the cooling-fan assembly 1. Ensure that you read the Safety instructions. 2. Follow the procedure listed in Before working inside your system. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Unlock the cooling-fan assembly from the chassis by lifting the release levers upward. 2. Lift the cooling-fan assembly out of the chassis. 42