Dell Precision Rack 7910 Dell Precision Rack 7910 Owners Manual - Page 64
Removing a GPU card
View all Dell Precision Rack 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
9. Ensure the GPU card is seated into the PCIe card holder latch. 10. Press the touch point to open the PCIe card holder latch and/or the expansion-card locking tabs. 11. Connect the GPU power cable to the riser. 12. Close the expansion-card latch/latches. Follow the procedure listed in After working inside your system. Removing a GPU card 1. Ensure that you read the Safety instructions. 2. Follow the procedure listed in Before working inside your system. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Lift the expansion-card latch. 2. Close the expansion-card locking tabs on the cooling shroud and the risers. 3. Hold the GPU card by its edges and slide out the GPU card at an angle to release it from the connector on the riser card. 4. Disconnect the cable from the GPU card. 5. If you are removing the card permanently, install a metal filler bracket over the empty slot opening and close the expansion-card locking tabs. NOTE: You must install a filler bracket over an empty expansion slot to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system. 64