Epson ES-300C User Manual - Page 105
Connecting a Printer to the Scanner
View all Epson ES-300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Preparing for a Direct Print Operation If you are using an Epson LQ-860 printer, use the printer's DIP switches to select unidirectional printing for better results. See your printer's manual for details on how to set these values. Note: If you have changed the DIP switch settings or the interface type with SelecType, turn the printer off and back on to reset the printer's defaults. Connecting a Printer to the Scanner Use a standard parallel cable with a Centronics® type connector at each end to connect the scanner and printer for direct printing. Note: Before connecting the cable, make sure that both the scanner and the printer are turned off. D-14 Direct Print Function
Preparing
for
a Direct Print Operation
If you are using an Epson LQ-860 printer, use the printer's DIP
switches to select unidirectional printing for better results.
See your printer’s manual for details on how to set these values.
Note:
If you have changed the DIP switch settings or the interface
type with SelecType, turn the printer off and back on to reset the
printer’s defaults.
Connecting a Printer to the Scanner
Use a standard parallel cable with a Centronics
®
type connector at
each end to connect the scanner and printer for direct printing.
Note: Before connecting the cable, make sure that both the
scanner and the printer are turned off.
D-14
Direct Print Function