Epson ES-300C User Manual - Page 96
Changing the DIP Switch Settings, CRT Display
View all Epson ES-300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Using the DIP Switches The values corresponding to the above factory settings are as follows: Baud rate: 9600 bps Stop bit: 2 bits Parity check: None Printer type: Epson 24-pin color printer (80 column) (for the direct print function only) Halftoning mode: Halftoning mode A Gamma correction: CRT Display A Color correction: CRT Display Parallel interface: Bidirectional Changing the DIP Switch Settings 1. Turn off the scanner and remove the DIP switch cover by sliding it toward you. Direct Print Function D-5
Using the DIP Switches
The values corresponding to the above factory settings are as
follows:
Baud rate:
9600 bps
Stop bit:
2 bits
Parity check:
None
Printer type:
Epson 24-pin color printer (80 column)
(for the direct print function only)
Halftoning mode:
Halftoning mode A
Gamma correction:
CRT Display A
Color correction:
CRT Display
Parallel interface:
Bidirectional
Changing the DIP Switch Settings
1.
Turn off the scanner and remove the DIP switch cover by sliding
it toward you.
Direct Print Function
D-5