Epson ES-300C User Manual - Page 88
Connecting the Scanner to Other SCSI Devices
View all Epson ES-300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Connecting the Scanner to the SCSI Interface Connecting the Scanner to Other SCSI Devices If you are connecting more than two SCSI devices in the daisy chain, you need a 50-pin to 50-pin SCSI peripheral cable. follow those guidelines could cause damage to or interfere with operation of the scanner and/or computer. 1. You must place the scanner (containing the SCSI board with an internal terminator) at the end of the daisy chain. The order of connection does not affect the speed of scanning operations. If you have a Macintosh with an internal hard disk, the hard disk itself has a terminator and therefore is the first SCSI device in the daisy chain. 2. Attach any SCSI devices (without terminators or with terminator resistors removed by your dealer) to the middle of the chain as shown in the following illustration. Internal terminator Computer SCSI device ES-300C scanner CAUTION: Do not connect more than two devices with terminators to the SCSI interface. Having more than two terminators connected at one time could cause serious damage to the SCSI devices on the daisy chain. Connecting the Scanner to a Macintosh C-11