Epson ES-300C User Manual - Page 108
button to eject, When printing is finished, set the printer off line and press
View all Epson ES-300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Starting a Direct Print Operation 5. When the scanner has finished scanning the image, its carriage returns to the home position and the READY light comes on. Note: l Because the printer is much slower than the scanner, the scanner occasionally stops scanning to allow the printer to catch up. l Direct printing with a zoom setting of 100% takes about 7 minutes. At 50%, it takes about 5 minutes. 6. When printing is finished, set the printer off line and press the FORM FEED or LOAD/EJECT button to eject the printed paper. (The scanner does not send a form feed code after direct printing.) 7. When you have finished direct printing, turn off the scanner and printer and disconnect them from each other. Direct Print Function D-17
Starting a Direct Print Operation
5.
When the scanner has finished scanning the image, its carriage
returns to the
home
position and the
READY
light comes on.
Note:
l
Because the printer is much slower than the scanner, the
scanner occasionally stops scanning to allow the printer to
catch up.
l
Direct printing with a zoom setting of 100% takes about 7
minutes. At 50%, it takes about 5 minutes.
6.
When printing is finished, set the printer off line and press the
FORM FEED
or
LOAD/EJECT
button to eject
the
printed paper. (The
scanner does not send
a
form feed code after direct printing.)
7.
When you have finished direct printing, turn off the scanner and
printer and disconnect them from each other.
Direct Print Function
D-17