Epson ES-300C User Manual - Page 109
Tips for Direct Printing, Terminating a Direct Print Operation, Zoom and Printable Size
View all Epson ES-300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Tips for Direct Printing This section provides information that may help you in using the direct print function. Terminating a Direct Print Operation Direct printing does not stop until the whole of the scanning area is scanned or the scanner is turned off. When the printer is set off line or runs out of paper, the scanner stops sending data. To resume printing, set the printer on line or load more paper. To terminate direct printing in the middle of an operation, first set the printer off line to halt printing, then turn off the scanner. Remove the paper from the printer by pressing the FORM FEED or LOAD/EJECT button; then turn off the printer. (Do not use the platen knob.) If you turn off the scanner before turning off the printer, the printer may be unable to go off line. In this case, turn the scanner back on, or turn the printer off and then back on again before removing the paper from the printer. If you turn the printer off and back on again during direct printing, the scanner initializes itself and terminates direct printing. Zoom and Printable Size To allow for margins around the printable area for appropriate paper feeding and printing, the maximum size of printing is limited to be within the printable area of the printer type selected. For an 80 column printer, the maximum printable size is approximately 7.1 x 9.3 inches or 200 mm x 237 mm, and for a 136 column printer, it is approximately 9.7 x 11.9 inches or 246 mm x 301 mm. D-18 Direct Print Function