Epson R1800 User's Guide - Page 91
Printer Problems, You're having problems installing or using the printer software. - won t print
UPC - 010343853072
View all Epson R1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
You're having problems installing or using the printer software. ■ Make sure your printer is turned on and its cable is securely connected at both ends. Follow the installation steps on the Start Here sheet, and make sure your system meets the requirements on page 103. ■ Close other programs, including screen savers and virus protectors, and install again. ■ If you see an error message with Windows 2000, you may not have software installation privileges. Contact your System Administrator. ■ If you're using Windows and the USB port, make sure your system was not upgraded from Windows 95; the USB driver may not install correctly. ■ If you're using Windows Vista, you cannot connect the printer using a FireWire cable; you must use a USB cable. ■ If you're printing over a network, see your on-screen Reference Guide for instructions on configuring your printer for use on a network. ■ In Windows, make sure your printer is selected as the default printer in the Printers utility. Printer Problems Only the green P power light is on, but nothing prints. ■ Make sure the interface cable is securely connected at both ends and meets the system requirements on page 103. ■ Run a printer check as described on page 90. If the test page prints, make sure your software is installed correctly. ■ If you're printing on a network, make sure you set up your printer for network printing, as described in your on-screen Reference Guide. The printer sounds as though it is printing, but nothing prints. ■ The print head may need cleaning; see page 73 for instructions. ■ The printer won't operate properly if it's tilted or at an angle. Place it on a flat, stable surface. Solving Problems 91