HP 3500 HP Color LaserJet 3500 and 3700 Series Printers - User Guide - Page 154
REMOVE AT LEAST ONE, Cancel Job key
View all HP 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Control panel message Ready Diagnostics mode alternates with To exit press Cancel Job key Ready Receiving upgrade RELOAD TRAY X TRNSPRNCY alternates with Verify transparency meets specification REMOVE ALL PRINT CARTRIDGES alternates with To exit press Cancel Job key REMOVE AT LEAST ONE PRINT CARTRIDGE alternates with To exit press Cancel Job key REPLACE CARTRIDGE alternates with For help press Description The printer is online and ready for data. No status or device attendance messages are pending at the display. Recommended action No action necessary. The printer is online and ready for data. No status or device attendance messages are pending at the display. A firmware upgrade is in progress. No action necessary. Do not turn the printer off until the printer returns to Ready. The transparency currently loaded might not be supported. CAUTION Use only transparencies specified for use with HP Color LaserJetprinters. Noncompatible transparencies can damage the printer. See the HP LaserJet Printer Family Print Media Specification Guide. 1. Remove all non-compatible transparencies from Tray X. 2. Load compatible transparencies in Tray 1. See Printing on special media for more information. The printer is executing a Component Test. Remove all print cartridges. After diagnostics are complete, reinstall all print cartridges. The printer is executing a Disable Cartridge Check or Component Test. Remove one print cartridge. After the test is complete, reinstall the print cartridge. The identified print cartridge has reached the end of life. Printing will not continue until the cartridge is replaced. Press for help. or See Changing print cartridges or Replacing supplies and parts for more information. See Supplies and accessories for more information. 142 Chapter 8 Problemsolving ENWW