HP 3500 HP Color LaserJet 3500 and 3700 Series Printers - User Guide - Page 163
Storage Write Fail, X Storage Error
View all HP 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Control panel message 68.X PERMANENT STORAGE FULL alternates with To continue press 68.X PERMANENT STORAGE WRITE FAIL alternates with To continue press 68.X STORAGE ERROR SETTINGS CHANGED alternates with To continue press 79.XXXX PRINTER ERROR alternates with To continue turn off then on 8X.YYYY EIO ERROR Description Recommended action A non-volatile storage device is full. Press to clear the message. Printing can continue, but there could be unexpected behavior. X Description 1 for removable disk (flash or hard) 0 for onboard NVRAM 1. Press to continue. 2. For 68.0 errors, turn the printer off and then back on. 3. If a 68.0 error persists, contact HP Support. 4. For 68.1 errors, use the HP Web Jetadmin software to delete files from the disk drive. 5. For 68.1 errors that persist, contact HP Support. A non-volatile storage device is full. Press to clear the message. Printing can continue, but there could be unexpected behavior. X Description 0 for onboard NVRAM 1 for removable disk (flash or hard) 1. Press to continue. 2. If the problem persists, contact HP Support. One or more printer settings saved in the non-volatile storage device is invalid and has been reset to its factory default. Press to clear the message. Printing can continue, but there could be unexpected behavior. 1. Press to continue. 2. Turn the printer off and then back on. 3. If the message persists, contact HP Support. A critical hardware error has occurred. 1. Turn the printer off and then back on. 2. If the problem persists, contact HP Support. The EIO accessory card in slot X has encountered a critical error. For the HP Color LaserJet 3700 series printer only. 1. Turn the printer off and then back on. 2. If the problem persists, contact HP Support. ENWW Control panel messages 151