HP 3500 HP Color LaserJet 3500 and 3700 Series Printers - User Guide - Page 189

Issue, Cause, Solution, USE REQUESTED TRAY, EXCLUSIVELY, Tray 3. See

Page 189 highlights

Issue Paper does not feed from Trays 2 and 3 Cause Solution Manual feed or Tray 1 is selected in the software application. Load Tray 1 with paper, or if the paper is loaded, press . The correct size paper is not loaded. Load the correct size paper. The tray is empty. Load paper in the tray. The correct paper type for the tray is not selected in the printer control panel. From the printer control panel, select the correct paper type for the tray. Paper from a previous jam has not been completely removed. Open the printer and remove any paper in the paper path. Closely inspect the fuser area for jams. See Paper jams. Tray 3 (500-sheet paper feeder) does not appear as a tray option. Tray 3 appears as an option only if it is installed. Verify that Tray 3 is correctly installed. Verify that the printer driver has been configured to recognize Tray 3. See Gaining access to printer driver settings. Tray 3 is incorrectly installed. Print a configuration page to confirm that Tray 3 is installed. If not, verify that the optional installed 500-sheet feeder assembly is correctly attached to the printer. The paper size is not configured correctly for the tray. Print a configuration page or use the control panel to determine the paper size for which the tray is configured. The guides in the tray are not against the paper. Verify that the guides are touching the paper. The USE REQUESTED TRAY setting in the printer control panel is set to EXCLUSIVELY, and the requested tray is empty. The printer will not use another tray. Change the setting from EXCLUSIVELY, or load paper in the requested tray. ENWW Paper handling problems 177

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252

Issue
Cause
Solution
Paper does not feed from
Trays 2 and 3
Manual feed or Tray 1 is
selected in the software
application.
Load Tray 1 with paper, or if
the paper is loaded, press
.
The correct size paper is not
loaded.
Load the correct size paper.
The tray is empty.
Load paper in the tray.
The correct paper type for the
tray is not selected in the
printer control panel.
From the printer control panel,
select the correct paper type
for the tray.
Paper from a previous jam has
not been completely removed.
Open the printer and remove
any paper in the paper path.
Closely inspect the fuser area
for jams. See
Paper
jams
.
Tray 3 (500-sheet paper
feeder) does not appear as a
tray option.
Tray 3 appears as an option
only if it is installed. Verify that
Tray 3 is correctly installed.
Verify that the printer driver has
been configured to recognize
Tray 3. See
Gaining
access
to
printer
driver
settings
.
Tray 3 is incorrectly installed.
Print a configuration page to
confirm that Tray 3 is installed.
If not, verify that the optional
installed 500-sheet feeder
assembly is correctly attached
to the printer.
The paper size is not
configured correctly for the tray.
Print a configuration page or
use the control panel to
determine the paper size for
which the tray is configured.
The guides in the tray are not
against the paper.
Verify that the guides are
touching the paper.
The
USE REQUESTED TRAY
setting in the printer control
panel is set to
EXCLUSIVELY
,
and the requested tray is
empty. The printer will not use
another tray.
Change the setting from
EXCLUSIVELY
, or load paper
in the requested tray.
ENWW
Paper handling problems
177