HP 3500 HP Color LaserJet 3500 and 3700 Series Printers - User Guide - Page 196
Issue, Cause, Solution, Ready, REPLACE <COLOR>, CARTRIDGE, AUTOEXEC.BAT file. See
View all HP 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Issue Cause Solution Printer is on, but nothing prints The printer Ready indicator light is not lit. Press STOP to return the printer to the Ready state. The top cover is not closed properly. Close the top cover firmly. The Data indicator light is flashing. The printer is probably still receiving data. Wait for the Data indicator to stop flashing. REPLACE CARTRIDGE appears on the printer display. Replace the print cartridge specified on the printer display. A printer message other than Ready appears on the printer control panel. See Control panel messages. The parallel port may have a DOS timeout error. Add a MODE command to the AUTOEXEC.BAT file. See the DOS manual for additional information. The PS (PostScript Emulation) personality is not selected. Select PS or AUTO for the printer language. See Changing printer control panel configuration settings. The correct driver is not selected in the software application or printer driver. Select the driver for PostScript Emulation for this printer in the software application or printer driver. The printer is not properly configured. See Changing printer control panel configuration settings. The computer port is not configured or is not working properly. Run another peripheral connected to this port to verify that the port is working properly. The printer has not been correctly named for the network or for a Macintosh. For Macintosh, use the appropriate utility to name the printer on the network. From the Chooser, select the AppleTalk zone and the printer. 184 Chapter 8 Problemsolving ENWW