HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 100

• FibreAlliance MIB trap Associated with the FibreAlliance MIB (FA-MIB), this MIB manages SAN switches and devices from any company that complies with FibreAlliance specifications. If you use both SW-MIB and FA-MIB, you may receive duplicate information. You can disable the FA-MIB, but not the SW-MIB. You can also use these additional MIBs and their associated traps: • FICON-MIB (for FICON environments) • SW-EXTTRAP Includes the swSsn (Software Serial Number) as a part of Brocade SW traps. For information on Brocade MIBs, see the Fabric OS MIB Reference. For information on the specific commands used in these procedures, see online help or the Fabric OS Command Reference. Setting the security level Use the snmpConfig --set seclevel command to set the security level. You can specify no security, authentication only, authentication and privacy, or off. You need to set the security for the GET and the SET commands. For example, to configure for authentication and privacy for both commands: switch:admin> snmpconfig --set seclevel Select SNMP GET Security Level (0 = No security, 1 = Authentication only, 2 = Authentication and Privacy, 3 = No Access): (0..3) [1] 2 Select SNMP SET Security Level (0 = No security, 1 = Authentication only, 2 = Authentication and Privacy, 3 = No Access): (2..3) [2] 2 switch:admin> snmpconfig --show seclevel GET security level = 2, SET level = 2 SNMP GET Security Level: Authentication and Privacy SNMP SET Security Level: Authentication and Privacy Using the snmpConfig command Use the snmpConfig --set command to change either the SNMPv3 or SNMPv1 configuration. You can also change access control, MIB capability, and system group. 100 Configuring standard security features