HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 38

Table 4 License requirements Feature QoS RADIUS RBAC Routing traffic Security SNMP SSH public key Top Talkers Traffic Isolation Trunking Two-factor authentication Two-to-four domains in a fabric USB usage Web Tools Zoning License Adaptive Networking No license required. No license required. No license required. This includes port-based or exchanged-based routing, static routes, frame-order deliver, and dynamic routes. No license required. Includes the DCC, SCC, FCS, IP Filter, and authentication policies. No license required. No license required. Advanced Performance Monitoring No license required. ISL Trunking or ISL Trunking Over Extended Fabrics No license required. Value Line (Two/Four) No license required. No license required. No license required. Where license should be installed Local switch and attached switches. n/a n/a n/a n/a n/a n/a Local switch and attached switches. n/a Local and attached switches. n/a Local switch. May be required on attached switches. n/a Local and any switch you want to manage using Web Tools. Local and attached switches; or any switch you want to use in a zone. Inter-Chassis Link (ICL) licensing ICL ports can be used only with an ICL license. After the addition or removal of a license, the license enforcement is performed on the ICL ports only when the portdisable and portenable commands are issued on the ports. An ICL license must be installed on both DC Directors forming the ICL connection. 8-Gbps licensing IMPORTANT: This license is installed by default. Do not remove it under any circumstances. The 8-Gbps licensing applies to the 8-Gbps SAN Switches. The following are the basic rules for using, adding, or removing 8-Gbps licenses. • Without an 8-Gbps license, even if there is an 8-Gbps SFP plugged into a port in an applicable platform, the port would be enabled only to run at a maximum speed of 4-Gbps. • To obtain an 8-Gbps license, only the License ID from the switch is required. When you add the 8-Gbps license, a portdisable and portenable on each individual port on the switch, or a switchdisable and switchenable, must be performed to enable the 8-Gbps functionality. 38 Standard features