HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 99

3. Issue the keytool command and respond to the prompts: C:\Program Files\Java\j2re1.5.0_06\bin> keytool -import -alias RootCert -file RootCert.crt -keystore ..\lib\security\RootCerts Enter keystore password: changeit Owner: CN=Brocade, OU=Software, O=Brocade Communications, L=San Jose, ST=California, C=US Issuer: CN=Brocade, OU=Software, O=Brocade Communications, L=San Jose, ST=California, C=US Serial number: 0 Valid from: Thu Jan 15 16:27:03 PST 2007 until: Sat Feb 14 16:27:03 PST 2007 Certificate fingerprints: MD5: 71:E9:27:44:01:30:48:CC:09:4D:11:80:9D:DE:A5:E3 SHA1: 06:46:C5:A5:C8:6C:93:9C:FE:6A:C0:EC:66:E9:51:C2:DB:E6:4F:A1 Trust this certificate? [no]: yes Certificate was added to keystore In the example, changeit is the default password and RootCert is an example of a root certificate name. Summary of certificate commands Table 19 summarizes the commands for displaying and deleting certificates. For details on the commands, see the Fabric OS Command Reference. Table 19 Commands for displaying and deleting SSL certificates Command secCertUtil show secCertUtil show filename secCertUtil showcsr secCertUtil delete filename secCertUtil delcsr Description Displays the state of the SSL key and a list of installed certificates Displays the contents of a specific certificate Displays the contents of a CSR Deletes a specified certificate Deletes a CSR Configuring for SNMP You can configure for the automatic transmission of SNMP information to management stations. SNMPv3 and SNMPv1 are supported. The configuration process involves configuring the SNMP agent and configuring SNMP traps. The following commands are used in the process: • Use the configure command to set the security level. You can specify no security, authentication only, or authentication and privacy. • Use the snmpConfig command to configure the SNMP agent and traps for SNMPv3 or SNMPv1 configurations. • If necessary for backward compatibility, you can use these legacy commands to configure for SNMP v1: • Use the agtCfgShow, agtCfgset, and agtCfgDefault commands to configure the SNMPv1 agent. • Use the snmpMibCapSet command to filter at the trap level. The SNMP trap configuration specifies the MIB trap elements to be used to send information to the SNMP management station. There are two main MIB trap choices: • Brocade-specific MIB trap Associated with the Brocade-specific MIB (SW-MIB), this MIB monitors Brocade (HP) switches specifically. Fabric OS 6.1.1 administrator guide 99