HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 421

556200 Bps 30s avg, 491394 Bps lifetime avg Table 91 Command checklist for configuring FCIP links Step Command 1. Configure IPSec policies (optional). policy - -create 2. Persistently disable ports. portcfgpersistentdisable 3. If a VEX port is to be implemented, portcfgvexport configure the appropriate virtual port as a VEX_Port. 4. Configure the IP interface for both ports of a tunnel. portcfg ipif 5. Verify the IP interface for both ports portshow ipif of a tunnel. 6.Create one or more IP routes portcfg iproute connecting the IP interfaces across the IP network. 7. Create ARP entry for the IP interface if portcfg arp add VLAN tagging is to be implemented. (For IPv4 only, not required for IPv6). 8.Test IP connectivity between the local Ethernet interface (ge0 or ge1) and a destination IP address. portcmd - -ping 9. Configure FCIP tunnels. portcfg fciptunnel 10. If you are implementing FICON portcfg ficon emulation, configure FICON emulation. 11. If you are implementing FTRACE, configure FTRACE. portcfg ftrace 12. Verify FCIP tunnels. portshow fciptunnel 13. Enable the ports. portpersistentenable Fabric OS 6.1.x administrator guide 421