HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 219

zone: Blue_zone 1,1 21:00:00:20:37:0c:76:8c 21:00:00:20:37:0c:71:02 1,2 21:00:00:20:37:0c:76:22 21:00:00:20:37:0c:76:28 zone: Red_zone 1,0 21:00:00:20:37:0c:76:85 21:00:00:20:37:0c:71:df To clear all zone configurations: 1. Connect to the switch and log in as admin. 2. Issue the cfgClear command to clear all zone information in the transaction buffer. NOTE: Be careful using the cfgClear command; it deletes the defined configuration. switch:admin> cfgclear The Clear All action will clear all Aliases, Zones, FA Zones and configurations in the Defined configuration. cfgSave may be run to close the transaction or cfgTransAbort may be run to cancel the transaction. Do you really want to clear all configurations? (yes, y, no, n): (no) 3. Issue one of the following commands, depending on whether an effective zoning configuration exists: • If no effective zoning configuration exists, issue the cfgSave command. • If an effective zoning configuration exists, issue the cfgDisable command to disable and clear the zone configuration in nonvolatile memory for all switches in the fabric. Maintaining zone objects Although you can delete a zone configuration, there is a quicker and easier way to perform the same task with the zone object commands (zoneObjectExpunge, zoneObjectCopy, and zoneObjectRename). You can also copy and rename zone objects. When you copy a zone object, the resulting object has the same type as the original. Deleting a zone object also removes the object from any member lists of other objects. You can rename objects for all zone object types. To copy a zone object: 1. Connect to the switch and log in as admin. 2. Issue the cfgShow command to view the zone configuration objects you want to copy. cfgshow "pattern"[, mode] where: pattern mode A POSIX-style regular expression used to match zone configuration names. Specify 0 to display the contents of the transaction buffer (the contents of the current transaction), or specify 1 to display the contents of the nonvolatile memory. The default value is 0. For example, to display all zone configuration objects that start with Test: switch:admin> cfgshow "Test*" cfg: Test1 Blue_zone Fabric OS 6.1.1 administrator guide 219