HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 354

The Directors have a total of 10 slots. Slot numbers 5 and 6 are control processor blades; slots 1 through 4 and 7 through 10 are port blades. For 16-port blades, there are 16 ports, counted from the bottom, numbered 0 to 15. For 32-port blades, there are 32 ports numbered 0 to 31. • portnumber specifies a port number. Valid values for port number vary, depending on the switch type. This operand is required. • interval specifies an interval in seconds. The interval must be greater than or equal to five seconds. For end-to-end monitoring, the Tx and Rx counts are measured in bytes. This operand is optional. The following example displays an end-to-end monitor on a port at 6-second intervals: switch:admin> perfMonitorShow --class EE 4/5 6 perfmonitorshow 53, 6: Tx/Rx are # of bytes and crc is # of crc errors 0 1 2 3 4 crc Tx Rx crc Tx Rx crc Tx Rx crc Tx Rx crc Tx Rx 0 0 0 0 0 00 0 00 0 00 0 0 0 53m 4.9m 0 53m 4.9m 0 53m 4.9m 0 53m 4.9m 0 53m 0 0 53m 4.4m 0 53m 4.4m 0 53m 4.4m 0 53m 4.4m 0 53m 0 0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 0 0 53m 4.6m 0 53m 4.6m 0 53m 4.6m 0 53m 4.6m 0 53m 0 0 53m 5.0m 0 53m 5.0m 0 53m 5.0m 0 53m 5.0m 0 53m 0 0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 0 0 53m 4.5m 0 53m 4.5m 0 53m 4.5m 0 53m 4.5m 0 53m 0 0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 0 0 52m 5.0m 0 52m 5.0m 0 52m 5.0m 0 52m 5.0m 0 52m 0 0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 0 0 52m 4.6m 0 52m 4.6m 0 52m 4.6m 0 52m 4.6m 0 52m 0 354 Administering advanced performance monitoring