HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 322

3. Issue the portEnable command to enable the ports that you disabled in step 2. You can now physically attach ISLs from the Fibre Channel Router to the edge fabric. switch:admin> portenable 7/10 4. Issue the portCfgShow command to view ports that are persistently disabled. switch:admin> portcfgshow 7/10 Area Number: 74 Speed Level: AUTO Trunk Port OFF Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON EX Port ON Mirror Port ON FC Fastwrite ON 5. After identifying such ports, issue the portCfgPersistentEnable command to enable the port, and then the portCfgShow command to verify the port is enabled. switch:admin> portcfgpersistentenable 7/10 switch:admin> portcfgshow 7/10 Area Number: 74 Speed Level: AUTO Trunk Port OFF Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON EX Port ON Mirror Port ON FC Fastwrite ON 322 Using the FC-FC routing service