HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 259

Supported iSCSI initiators Table 69 lists iSCSI intitiators supported by the iSCSI gateway service. Table 69 Supported iSCSI initiators iSCSI initiator driver versions Windows • MS iSCSI initiator 2.02 • MS iSCSI initiator 2.03 • MS iSCSI initiator 2.04 Linux • RH EL 4 default initiator • RH 4 Advanced server, Update 4 (default initiator) • RH 5 Advanced server (default initiator) • 2.6.10 - 4.0.2 iSCSI initiator (SourceForge,Net initiator) • 2.4.20 - 3.6.2 iSCSI initiator (SourceForge,Net initiator) • SUSE 9 • SUSE 9, SP3 (default initiator) • SUSE 10 (default initiator) HP-UX • 11i v1 - B11.11.03e • 11i v1 - B.11.23.03e • 11i v2 - B.11.23.03e NIC/TOE cards iSCSI HBAs • Alacritech SES2002XT • Alacritech 2000 • QLogic 4050c • QLogic 4052 • HP NC3xx Checklist for configuring iSCSI Configure the iSCSI gateway service after you install the FC4-16IP blade in the 4/256 SAN Director. Table 70 provides a high-level overview of the commands and links to the sections that detail the procedures. See the Fabric OS Command Reference for detailed information on the commands. Table 70 iSCSI target gateway configuration steps Step Command Procedure 1 Activate iSCSI for the FC4-16IP. fosConfig --enable iscsi 2 Configure the IP address portCfg ipif /ge for GbE port(s). create 3 Optional) Configure the portCfg iproute IP route for the GbE /ge args port(s). 4 (Easy) Automatically iscsiCfg --easycreate tgt maps FC targets to iSCSI targets and names target with unique IQN. "Enabling the iSCSI gateway service" on page 262 "Configuring the GbE interface" on page 263 "Configuring the GbE interface" on page 263 "Automatic iSCSI VT creation" on page 265 Fabric OS 6.1.x administrator guide 259