HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 301

Activating and deactivating a TI zone The TI zone must exist before you can activate it. To activate or deactivate a TI zone: 1. Connect to the switch and log in as admin. 2. Issue the zone --activate command to activate a TI zone. Issue the zone --deactivate command to deactivate a TI zone. zone --activate name zone --deactivate name 3. where name is the name of the zone to be activated or deactivated. Issue the cfgEnable command to activate your current effective configuration and enforce TI zones. To activate the existing TI zone redzone: zone --activate redzone To deactivate the existing TI zone greenzone: zone --deactivate greenzone NOTE: Your changes are not enforced until you issue the cfgEnable command. Deleting a TI zone Use the zone -- --delete command to delete a TI zone from the defined configuration. This command deletes the entire zone; to remove only port members from a TI zone, use the zone --remove command, as described in "Modifying TI zones" on page 300. To delete a TI zone: 1. Connect to the switch and log in as admin. 2. Issue the zone --delete command. zone --delete name where name is the name of the zone to be deleted. You can delete multiple zones by separating the zone names with a semicolon and enclosing them in quotation marks. 3. Issue the cfgEnable command to reactivate your current effective configuration and enforce the TI zones. To delete the TI zone redzone: zone --delete redzone NOTE: Your changes are not enforced until you issue the cfgEnable command. Displaying TI zones Use the zone --show command to display information about TI zones. This command displays the following information for each zone: • zone name • E_Port members • N_Port members • failover option (enabled or disabled) • zone status (activated or deactivated) If you issue the cfgShow command to display information about all zones, the TI zones appear in the defined zone configuration only and do not appear in the effective zone configuration. Fabric OS 6.1.x administrator guide 301