HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 34

1. Connect to a switch and log in using an account assigned to the admin role. 2. Issue the fabricShow command. Fabric information is displayed, including the Domain ID (D_ID) switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 64: fffc40 10:00:00:60:69:00:06:56 192.168.64.59 192.168.65.59 "sw5" 65: fffc41 10:00:00:60:69:00:02:0b 192.168.64.180 192.168.65.180 >"sw180" 66: fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60" 67: fffc43 10:00:00:60:69:10:60:1f 192.168.64.187 0.0.0.0 "sw187" The Fabric has 4 switches The fields in the fabricShow display are: Switch ID is the switch Domain_ID and embedded port D_ID Worldwide Name is the switch WWN Enet IP Addr is the switch Ethernet IP address for IPv4 and IPv6 configured switches. For IPv6 switches, only the static IP address displays FC IP Addr is the switch FC IP address Name is the switch symbolic name. An arrow (>) indicates the principal switch. To set the Domain ID: 1. Connect to the switch and log in using an admin account. 2. Issue the switchDisable command to disable the switch. 3. Issue the configure command. 4. Enter y after the Fabric parameters prompt: Fabric parameters (yes, y, no, n): [no] y 5. Enter a unique Domain ID at the Domain prompt. Use a Domain ID value from 1 through 239 for normal operating mode (FCSW compatible): Domain: (1..239) [1] 3 6. Respond to the remaining prompts, or press Ctrl-D to accept the other settings and exit. 7. Issue the switchEnable command to re-enable the switch. Licensed features Feature licenses may be part of the licensed paperpack supplied with your switch software; if not, you can purchase licenses separately from HP. License keys are provided on a per-product and per-feature basis. Each switch within a fabric will need its own licensing. NOTE: To preserve licenses on your switch, perform a configupload prior to upgrading or downgrading your Fabric OS. If you downgrade your Fabric OS to the version earlier than 6.1.x, some licenses associated with specific features of Fabric OS 6.1.x may not work. Licenses can be associated with a feature version or a blade type. • If a feature has a version-based license, that license is valid only for a particular version of the feature. If you want a newer version of the feature, you must purchase a new license. Version upgrade: For example, a zoning license that is for Fabric OS version 6.0.0 is added. You can add another zoning license with a version greater than 5.2.0 without removing the zoning license for Fabric OS 5.2.0. Upgrading is allowed, but downgrading is not supported. If a license is not version-based, it is valid for all versions of the feature. 34 Standard features