HP A7533A HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, Dece - Page 105

Ports and applications used by switches If you are using the FC-FC Routing Service, be aware that the secModeEnable command is not supported in Fabric OS 6.1.0. Table 21 lists the defaults for accessing hosts, devices, switches, and zones. Table 21 Access defaults Access default Hosts Devices Switch access Zoning Any host can access the fabric by SNMP. Any host can Telnet to any switch in the fabric. Any host can establish an HTTP connection to any switch in the fabric. Any host can establish an API connection to any switch in the fabric. All devices can access the management server. Any device can connect to any FC port in the fabric. Any switch can join the fabric. All switches in the fabric can be accessed through a serial port. No zoning is enabled. Port configuration Table 22 provides information on ports that the switch uses. When configuring the switch for various policies, take into consideration firewalls and other devices that may sit between switches in the fabric and your network or between the managers and the switch. Table 22 Port information Port 22 23 80 111 123 161 443 512 513 514 897 Type TCP TCP TCP TCP TCP UDP TCP TCP TCP TCP TCP Common use SSH Telnet HTTP sunrpc NTP SNMP HTTPS exec login shell Comment Use the ipfilter command to block the port. Use the ipfilter command to block the port. This port is used by Platform API. Use the ipfilter command to block the port. Disable the SNMP service on the remote host if you do not use it, or filter incoming UDP packets going to this port. Use the ipfilter command to block the port. This port is used by the Platform API. Disable this port using the configure command. Fabric OS 6.1.1 administrator guide 105