HP Designjet 10000s HP Designjet 10000s Printer series - User's Guide - Page 196
Install the separator bar
View all HP Designjet 10000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
How do I print with a liner 6. Slide the separator bar holder (2) onto the support bar (1) at the wiper end. 7. Secure the separator bar holder (4) with the two attachment screws (2) from the installation kit, and push the rubber end cap (3) onto the end of the support bar (1). 8. Repeat the previous three steps, to install the separator bar holder at the cap end. Install the separator bar To use the separator bar. 1. Make sure the separator bar mounting assembly has been previously installed on your printer; install it if necessary ( Refer to Install the separator bar support assembly). 186 Chapter 5 How do I print with a liner ENWW
6.
Slide the separator bar holder (2) onto the support bar (1) at the wiper end.
7.
Secure the separator bar holder (4) with the two attachment screws (2) from the installation kit, and
push the rubber end cap (3) onto the end of the support bar (1).
8.
Repeat the previous three steps, to install the separator bar holder at the cap end.
Install the separator bar
To use the separator bar.
1.
Make sure the separator bar mounting assembly has been previously installed on your printer; install
it if necessary ( Refer to
Install the separator bar support assembly
).
186
Chapter 5
How do I print with a liner
ENWW
How do I print with a liner