HP Designjet T1500 HP Designjet T920 and T1500 ePrinter series - User's Guide - Page 171

Lines appear stepped or jagged, Lines print double or in the wrong colors

Page 171 highlights

5. If the problem remains, go to the front panel and press , then , then Image quality maintenance > Calibration status to see the printhead alignment status. If the status is PENDING, you should align the printhead. See Align the printhead on page 177. After alignment, you may wish to reprint your job in case the problem has been solved. 6. Go to the front panel and press , then , then Image quality maintenance > Calibration status to see the paper advance calibration status. If the status is DEFAULT, you should perform paper advance calibration: see Recalibrate the paper advance on page 159. 7. If lines are too thin or missing, print the Image Diagnostics Print. See The Image Diagnostics Print on page 171. If the problem persists despite all the above actions, contact your customer service representative for further support. Lines appear stepped or jagged If lines in your image appear stepped or jagged when printed: 1. The problem may be inherent in the image. Try to improve the image with the application you are using to edit it. 2. Check that you are using appropriate print-quality settings. See Printing on page 62. 3. Select the custom print-quality options in the driver dialog, and turn on the Maximum detail option (if available). Lines print double or in the wrong colors This problem can have various visible symptoms: ● Colored lines are printed double, in different colors. ● The borders of colored blocks are wrongly colored. To correct this kind of problem: ENWW Lines appear stepped or jagged 163

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210

5.
If the problem remains, go to the front panel and press
, then
, then
Image quality
maintenance
>
Calibration status
to see the printhead alignment status. If the status is PENDING, you
should align the printhead. See
Align the printhead
on page
177
. After alignment, you may wish to
reprint your job in case the problem has been solved.
6.
Go to the front panel and press
, then
, then
Image quality maintenance
>
Calibration
status
to see the paper advance calibration status. If the status is DEFAULT, you should perform paper
advance calibration: see
Recalibrate the paper advance
on page
159
.
7.
If lines are too thin or missing, print the Image Diagnostics Print. See
The Image Diagnostics Print
on page
171
.
If the problem persists despite all the above actions, contact your customer service representative for
further support.
Lines appear stepped or jagged
If lines in your image appear stepped or jagged when printed:
1.
The problem may be inherent in the image. Try to improve the image with the application you are using
to edit it.
2.
Check that you are using appropriate print-quality settings. See
Printing
on page
62
.
3.
Select the custom print-quality options in the driver dialog, and turn on the
Maximum detail
option (if
available).
Lines print double or in the wrong colors
This problem can have various visible symptoms:
Colored lines are printed double, in different colors.
The borders of colored blocks are wrongly colored.
To correct this kind of problem:
ENWW
Lines appear stepped or jagged
163