HP Deskjet F2100 User Guide - Page 117
On light, Check, Paper, light, Print, Cartridge, lights, Description, Solution
View all HP Deskjet F2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Troubleshooting (continued) On light Check Paper light On Off On Blinking Check Print Cartridge light Paper Type lights Blinking 1 On, 1 Off Blinking 1 On, 1 Off Description Solution and Check Print Cartridge lights on the control panel. Paper-size setting does not match the paper size detected in the input tray. Change the paper in the tray or the size setting in the software. Print cartridge door Raise the door to is open. close it. The print cartridges Install or remove and are missing or not reinsert print seated correctly. cartridges. The tape was not removed from the print cartridge. Remove print cartridge, remove tape, and reinsert print cartridge. The print cartridge is not intended for use in this HP All-inOne. The print cartridge might not be supported for use in the HP All-in-One. See the Order Supplies chapter in the User Guide. The print cartridge might be defective. 1. Remove the black print cartridge. 2. Close the print cartridge door. 3. Check the On light. • If the On light blinks, replace the tri-color print cartridge. • If the On light remains steadily lit, replace the black print cartridge. The print carriage is stalled. Open the print cartridge door, and check that the carriage is not blocked. Errors 115