HP Dx5150 HP Business Desktop dx5150 Series Service Reference Guide, 1st Editi - Page 141
Numeric Codes and Text Messages
UPC - 882780485433
View all HP Dx5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
POST Error Messages Numeric Codes and Text Messages (Continued) Code/Message Probable Cause Recommended Action Memory test fail If POST detects an error during memory testing, additional information appears giving specifics about the type and location of the memory error. Shut down the system, reseat the DIMMs, and reboot the system. If the problem persists, replace the DIMMs. Override enabled- Defaults loaded If the system cannot boot using the current CMOS configuration, the BIOS can override the current configuration with a set of BIOS defaults designed for the most stable, minimalperformance system. None. Error: Non-System disk or disk error. Replace and press any key when ready The BIOS was unable to find a suitable boot device. This may mean an unitialized or corrupt ATA flash. Shut down the system, ensure that the power and data cables of all storage devices are plugged in properly, and reboot the system. Ensure all removable media have been removed. Warning: CPU fan has failed. CPU fan weak (RPM < 1000) or not turning. Ensure that the CPU fan power cable is connected. If the problem persists, replace the fan. Warning: System Fan System fan weak (RPM < has failed. 1000) or not turning. Ensure that the System fan power cable is connected. If the problem persists, replace the fan. Memory is running at Single Channel Mode When two same size memories are put in slot 1 and 3, this message will be displayed. For optimal performance, shut down the system and move the second DIMM from the XMM3 to the XMM2 socket. Service Reference Guide, dx5150 361685-001 C-3